|
AX5 Manual Transmission Rebuild Kits
We offer quality AX5 rear wheel drive (RWD) manual transmission rebuild kits and parts. Our rebuild
kits are designed to be top of the line
overhaul kits. We have included information on how to identify you individual
transmission, application information, model year, detailed kit and part availablity
by transmission type. The Aisian Warner transmissions that are covered in this
section are: AX5 models's, rear wheel drive (RWD). Typically used
in Jeeps requiring 5 speed applications. In addition to bearings,
gaskets and seals we can provide input shaft, counter shafts, syncro rings,
syncro hubs and needle bearings. Individual gear and shift forks are also available. Give us a call toll free 800-216-1632 and ask about our good take out parts (used inspected) let us help save you some money!
An extensive list of transmission tag identification information
is provide at our tag conversion
table, check it out cross reference your information and get the correct
parts the first time.
Different overhaul kits are available depending
on the extent of the overhaul that you planning, the contents of the kits are
described as follows:
-
DTSBKXXX Kits (RWD): Main case bearings,
gaskets, seals. You may also want to add new bearing retainer, nuts, dogs
& wires, extension housing bushing, small parts kit, shifter bushings.
Syncro rings are not included in these kits.
-
DTSBKXXXWS Kits (RWD): Main case
bearings, gaskets, seals. You may also want to add bearing retainer, nuts,
dogs & wires, extension housing bushing, small parts kit, shifter
bushings. Syncro rings are included in these kits.
IDENTIFICATION - End loaded, aluminum case with four bearings,
an 8-bolt front bearing retainer and a 4-bolt shifter.
| AX5 (4 Cylinder) |
80mm Outside Diameter Input Bearing |
1984-96
|
| AX5 (6 Cylinder) |
80mm Outside Diameter Input Bearing |
1986
|
Below you will find parts for the AX5 5 speed transmissions
used in AX5 Jeep. In
addition to these overhaul kits we can provide miscellaneous hardparts, don't
see what you need just give us a call.
| Vehicle |
Trans. Model
|
Year |
Description |
Overhaul Kit
|
Your Cost
|
Overhaul Kit with Syncro Rings
|
| 5spd, RWD or 4WD Toyota design - |
|
|
|
|
|
|
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.1L |
AX5 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$ 133.98 |
DTSBK160AWS |
$ 211.98 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX5 |
1984-87 |
20mm wide input bearing - nut type countershaft |
DTSBK160A |
$ 133.98 |
DTSBK160AWS |
$ 211.98 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.1 L |
AX5 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$ 133.98 |
DTSBK160AWS |
$ 211.98 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX5 |
1984-87 |
20mm wide input bearing - nut type countershaft |
DTSBK160A |
$ 133.98 |
DTSBK160AWS |
$ 211.98 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.1L |
AX5 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 151.98 |
DTSBK161AWS |
$ 218.98 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX5 |
1984-87 |
23mm wide input bearing - nut type countershaft |
DTSBK161A |
$ 151.98 |
DTSBK161AWS |
$ 218.98 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.1L |
AX5 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 151.98 |
DTSBK161AWS |
$ 218.98 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX5 |
1984-87 |
23mm wide input bearing - nut type countershaft |
DTSBK161A |
$ 151.98 |
DTSBK161AWS |
$ 218.98 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX5 |
1987-01 |
23mm wide input bearing - snap ring type countershaft |
DTSBK161LA |
$ 168.98 |
DTSBK161LAWS |
$ 220.98 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX5 |
1987-02 |
23mm wide input bearing - snap ring type countershaft |
DTSBK161LA |
$ 168.98 |
DTSBK161LAWS |
$ 220.98 |
|
PART NUMBER
|
DESCRIPTION
|
TYPE
|
YEARS
|
COST
|
| SYNCHRO RING KITS |
|
| SRK157 |
Syncro Ring Kit |
AX5 |
1984-97
|
$55.92
|
| MISCELLANEOUS KITS |
|
| K100502-8 |
Gasket & Seal Kit |
AX5 |
1984-96
|
$22.62
|
| DK500 |
Syncro Dog & Spring Kit |
AX5 |
1984-96
|
$33.74
|
TRS372001
|
Small Parts Kit |
|
|
$88.08 |
| BEARINGS |
|
| 301570 |
Input |
AX5, 23mm Wide |
1984-96
|
$42.60
|
| 301770 |
Countershaft, Front |
AX5 |
1984-96
|
$41.30
|
| MTCNBAX5 |
Needle Bearing Kit |
|
|
$109.96
|
| METAL CLAD SEALS |
|
| 301080 |
Front |
|
1989-97
|
$6.92
|
| 301038 |
Rear |
2WD |
1989-97
|
$6.90
|
| 301089 |
Rear |
4WD |
1989-97
|
$6.00
|
| MISCELLANEOUS HARD PARTS |
|
| TRS37670 |
Input Shaft Gear |
AX5 (Gas) with 20mm Wide Front Bearing |
1984
|
$143.58
|
| TRS37670A |
Input Shaft Gear |
AX5 (Gas) with 23mm Wide Front Bearing |
1985-E87
|
$173.52
|
| TRS372672 |
Main Shaft 4WD
|
|
1984-E87 |
$312.77 |
| TRS372672A |
Main Shaft 4WD |
|
1987-Up |
$217.87 |
| TRS83500557 |
Cluster Gear 45-31-20-13-14 |
AX5 (Gas) with nut
|
|
$201.48 |
| TRS83506023 |
Cluster Gear 45-31-20-13-14 |
AX5 (Gas) with Snap Ring
|
|
$201.48 |
| TRS372735 |
Front Bearing Retainer |
AX5 with snout
|
1984-E87
|
$123.89
|
| TRS372735A |
Front Bearing Retainer |
AX5 with out snout |
1987-Up
|
$123.89
|
| TRS372736 |
Rear Bearing Retainer |
|
1984-87 |
$63.93 |
| TRS372736A |
Rear Bearing Retainer |
|
1987-Up |
$78.36 |
| ALT83500629 |
Switch, Backup Light fits AX5 |
2 Prong with wires |
|
$83.61
|
| TRS57066A |
Extension Housing Bushing 1.500" ID
|
2WD AX5
|
1984-97
|
$6.38
|
| |
Note: Check Tag to Component
Identification Chart to verify proper gear and/or kit application. |
|
|
|
For a replacement high quality remanufacture transmissions see manual
transmissions These units have a 12 month, unlimited mile warranty. In
addition some information is provide relative to possible transmission conversions.
|
Manual Transmission Parts 
